oscam-2.26.01-11942-802-with-Advanced-fake-dcw-detection/Distribution/doc/man/oscam.user.5

.TH oscam.user 5
.SH NAME
\fBoscam.user\fR - user configuration file for OSCam
.SH SYNOPSIS
The user configuration file for OSCam contains user definitions. [account]
sections in \fBoscam.user\fR are \fIrecurring\fR (more than one account).
.SH DESCRIPTIONS
.SS "The [account] section"
.PP
\fBuser\fP = \fBname\fP
.RS 3n
account name, \fIrequired\fR
.RE
.PP
\fBpwd\fP = \fBpassword\fP
.RS 3n
password for account, \fIrequired\fR
.RE
.PP
\fBdescription\fP = \fBtext\fP
.RS 3n
description of user account
.RE
.PP
\fBdisabled\fP = \fB0\fP|\fB1\fP
.RS 3n
1 = account disabled, default:0
.RE
.PP
\fBhostname\fP = \fBhostname\fP
.RS 3n
host from which user connection is allowed
.RE
.PP
\fBexpdate\fP = \fB<year>-<month>-<day>\fP|\fB<year>/<month>/<day>\fP
.RS 3n
expiration date for account, default:none

 example: expdate = 2001-11-21
          expdate = 2002/12/22
.RE
.PP
\fBallowedprotocols\fP = \fB[camd33][,][camd35][,][cs357x][,][cs378x][,][newcamd][,][cccam][,][gbox][,][radegast]\fP
.RS 3n
list of all allowed connection protocols, default:all connection protocols
.RE
.PP
\fBallowedtimeframe\fP = \fBDAY@HH:MM-HH:MM[,HH:MM-HH:MM][,HH:MM-HH:MM] [;DAY@HH:MM-HH:MM[,HH:MM-HH:MM][,HH:MM-HH:MM]]\fP
.RS 10n
where DAY=\fBSUN,MON,TUE,WED,THU,FRI,SAT\fP or \fBALL\fP (for all possible days)
.RE
.RS 3n

account enabled from hh:mm to hh:mm for the specified day(s), default:none

comma (,) to separate times and semicolon(; ) to separate the different days.
You can use ALL@ if you want the same time frames for everyday.

Example:

allowedtimeframe=ALL@10:00-22:00;MON@00:00-02:00,02:45-04:37; FRI@00:00-10:00,22:00-24:00;SAT@00:00-24:00

If you use: DAY@22:00-05:00 this will be turned into DAY@00:00-05:00,22:00-24:00

ALL@ is always checked and used, so you can watch TV the whole day on FRIday in this exemple. There is no problem to overlap ALL@ in a day definition, like for SAT@ definition.
.RE
.PP
\fBmax_connections\fP = \fBcount\fP
.RS 3n
maximum allowed connections per user when unique level will be adducted, default:1
.RE
.PP
\fBuniq\fP = \fB0\fP|\fB1\fP|\fB2\fP|\fB4\fP
.RS 3n
unique level:

 \fB0\fP = disabled (default)
 \fB1\fP = only one connection per user is allowed
 \fB2\fP = set user to fake if source ip is different
     (e.g. for newcamd clients with different CAIDs and ports)
 \fB3\fP = only one connection per user, but only the last login
     will survive (old MpCS behavior)
 \fB4\fP = set user only to fake if source ip is different,
     but only the last login will survive
.RE
.PP
\fBnumusers\fP = \fBquantity\fP
.RS 3n
anti-cascading: user per account, 0 = anti-cascading disabled, -1 = global value from oscam.conf, default:-1
.RE
.PP
\fBpenalty\fP = \fB0\fP|\fB1\fP|\fB2\fP
.RS 3n
level of penalty:

 \fB-1\fP = level of oscam.conf (default)
 \fB 0\fP = only logging
 \fB 1\fP = send fake CWs
 \fB 2\fP = temporary user ban
 \fB 3\fP = send delayed CWs
.RE
.PP
\fBfakedelay\fP = \fB0\fP|\fB1\fP|\fBmilli-seconds\fP
.RS 3n
set fake delay time individually for user:

 \fB 0\fP = disable fake delay
 \fB-1\fP = fake delay of oscam.conf (default)
.RE
.PP
\fBacosc_max_ecms_per_minute\fP = \fBcount\fP
.RS 3n
maximum ecms per minute, 0 = unlimited, -1 = use global setting, default:0
.RE
.PP
\fBacosc_max_active_sids\fP = \fBcount\fP
.RS 3n
maximum active SIDs with anti-cascading over SID, 0 = unlimited, -1 = use global setting, default:0
.RE
.PP
\fBacosc_zap_limit\fP = \fBcount\fP
.RS 3n
zap limit for anti-cascading over SID, 0 = unlimited, -1 = use global setting, default:0
.RE
.PP
\fBacosc_penalty\fP = \fB0\fP|\fB1\fP|\fB2\fP|\fB3\fP|\fB4\fP|\fB-1\fP
.RS 3n
level of penalty with anti-cascading over SID count:

  \fB0\fP = only logging (default)
  \fB1\fP = send fake CWs
  \fB2\fP = temporary user ban
  \fB3\fP = send delayed CWs
  \fB4\fP = temporary hidecards to the client
 \fB-1\fP = use global setting
.RE
.PP
\fBacosc_penalty_duration\fP = \fBseconds\fP
.RS 3n
penalty duration for anti-cascading over SID count, -1 = use global setting, default:0
.RE
.PP
\fBacosc_delay\fP = \fBmilli-seconds\fP
.RS 3n
delay for anti-cascading over SID count, -1 = use global setting, default:0
.RE
.PP
\fBfailban\fP = \fB0\fP|\fB2\fP|\fB4\fP|\fB8\fP
.RS 3n
mask for IP address based blocking:

 \fB0\fP = ignore (default)
 \fB2\fP = block IP address of a disabled account on connecting
 \fB4\fP = block IP address of a sleeping account while sleeping comes up
 \fB8\fP = block duplicate IP address
.RE
.PP
\fBlb_nbest_readers\fP = \fBcounts\fP
.RS 3n
set count of best readers for load balancing, -1 = use global lb_nbest_readers, default:-1
.RE
.PP
\fBlb_nfb_readers\fP = \fBcounts\fP
.RS 3n
set count of fallback readers for load balancing, -1 = use global lb_nfb_readers, default:1
.RE
.PP
\fBlb_nbest_percaid\fP = \fBCAID1:count1[,CAID2:count2]...\fP
.RS 3n
set count of best readers per CAIDs for load balancing, wildcard CAIDs with two-digit CAIDs possible, default:none

 example: lb_nbest_percaid = 0100:4,0200:3,03:2,04:1
          (wildcard CAIDs 03xx and 04xx)
.RE
.PP
\fBpreferlocalcards\fP = \fB0\fP|\fB1\fP
.RS 3n
SC decoding behavior:.

 \fB-1\fP = global value from oscam.conf (default)
  \fB0\fP = local SCs used like a remote reader
  \fB1\fP = prefer cache exchange based SCs
  \fB2\fP = prefer local SCs
.RE
.PP
\fBcwc_disable\fP = \fB0\fP|\fB1\fP
.RS 3n
1 = disbale CW cycle check, default:0
.RE
.PP
\fBcacheex\fP = \fB0\fP|\fB1\fP|\fB2\fP|\fB3\fP
.RS 3n
set cache exchange mode

 \fB0\fP: disable cache exchange mode (default)
 \fB1\fP: enable cache exchange pull mode
 \fB2\fP: enable cache exchange push mode for camd 3.5x / 3.57x and
    CCcam protocol
 \fB3\fP: enable reverse cache exchange push mode for camd 3.5x / 3.57x
    and CCcam protocol

\fIIdentical cache exchange modes must be set on local OSCam user account and remote OSCam server.\fR

\fIPlease consider memory consumption.\fR
.RE
.PP
\fBcacheex_maxhop\fP = \fBhops\fP
.RS 3n
define maximum hops for cache exchange, default=10
.RE
.PP
\fBno_wait_time\fP = \fB0\fP|\fB1\fP
.RS 3n
set wait time behaviour:

 \fB0\fP: use \fBwait_time\fP set in \fBoscam.conf\fP (default)
 \fB1\fP: do not use \fBwait_time\fP set in \fBoscam.conf\fP
.RE
.PP
\fBcsp_ecm_filter\fP = \fB[caid][&mask][@provid][$servid],n\fP
.RS 3n
cache exchange incoming ECM filter setting (mode 3 only) for Cardservproxy, default:none
.RE
.PP
\fBcacheex_drop_csp\fP = \fB0\fP|\fB1\fP
.RS 3n
1 = drop incoming Cardservproxy cache (mode 3 only), detection is zero ecmd5, default:0
.RE
.PP
\fBcacheex_allow_request\fP = \fB0\fP|\fB1\fP
.RS 3n
1 = allow incoming ECM request (mode 3 only), default:1
.RE
.PP
\fBcacheex_allow_filter\fP = \fB0\fP|\fB1\fP
.RS 3n
1= allow cache exchange filter (for cache exchange mode 3 only), default:1
.RE
.PP
\fBcacheex_block_fakecws\fP = \fB0\fP|\fB1\fP
.RS 3n
1 = enable fake DCWs blocking (for cache exchange mode 3 only), get fake DCWs form \fBoscam.fakecws\fP, default:0
.RE
.PP
\fBsleep\fP = \fBminutes\fP
.RS 3n
time waiting for inactive user, default:none
.RE
.PP
\fBsleepsend\fP = \fB0\fP|\fB255\fP
.RS 3n
255 = \fIOSCam client only\fR: stopping requests until next zap, 255 = \fIcamd 3.x only\fR: stopping requests until restart of camd 3.x client, default:0
.RE
.PP
\fBsuppresscmd08\fP = \fB0\fP|\fB1\fP
.RS 3n
0 = tell camd 3.5x, 3.57x and 3.78x clients not to request again for rejected
CAID, service ID and provider ID combination, 1 =  disable, default:0
.RE
.PP
\fBkeepalive\fP = \fB0\fP|\fB1\fP
.RS 3n
0 = disable keepalive between server and client for newcamd or CCcam protocol, default:1
.RE
.PP
\fBumaxidle\fP = \fBseconds\fP
.RS 3n
value for user being idle before disconnect, 0 = idle disconnect disabled, -1 use clientmaxidle in global section, default:-1
.RE
.PP
\fBcaid\fP = \fB<CAID>[&<mask>][:<target CAID>][,<CAID>[&<mask>][:<target CAID>]]...\fP
.RS 3n
limit and mapping of CAIDs, default:all CAIDs with mask FFFF

example: caid = 0100
         caid = 0200&ffee:0300
         caid = 0400&ff00:0500,0600
         caid = 0702,0722
         caid = 0702&ffdf (shortcut for the example above)
.RE
.PP
\fBau\fP = \fBlabel of reader[,label of reader]...\fP|\fB1\fP
.RS 3n
AU setting, default:none:

  \fBlabel of reader\fP = sending EMMs to specified reader
                    \fI(security issue: clients can see SC data!)\fR
  \fB1\fP               = auto AU is sending EMMs to \fIall\fR readers
                    \fI(security issue: clients can see SC data!)\fR
.RE
.PP
\fBgroup\fP = \fB1..64[,1..64]...\fP
.RS 3n
user assingment to reader groups, default:none, \fIrequired\fR
.RE
.PP
\fBbetatunnel\fP = \fB<CAID>.<ServiceID>:<target CAID>[,<CAID>.<ServiceID>:
<target CAID>]...\fP
.RS 3n
Define Betacrypt tunneling.
The ServiceID can also be used for wildcarded CAIDs.

 example: betatunnel = 0100.0001:0200,0300.0004:0500
          betatunnel = 0600.FFFF:0700

\fIBe carefull using abbreviations.\fR
.RE

.PP
\fBemmreassembly\fP = \fB0\fP|\fB1\fP||\fB2\fP
.RS 3n
EMM reassembly, should be set for Viaccess and Cryptoworks readers if the
client that you are using to send EMMs is reassembling them instead of
just sending them to OSCam for processing.

  \fB0\fP: disabled
  \fB1\fP: enabled for DVB API
  \fB2\fP: enabled (default)
.RE
.PP
\fBservices\fP = \fB[!]services[,[!]<services>]...\fP
.RS 3n
user [de]assingment to service group, default:none
.RE
.PP
\fBident\fP = \fB<CAID>:<provid>[,<provid>,...][;<CAID>:<provid>[,<provid>,...]]...\fP
.RS 3n
user assingment to SC specific idents, default:none
.RE
.PP
\fBclass\fP = \fB[!]class[,[!]class]...\fP
.RS 3n
user [de]assingment to SC specific classes, default=none

 example: class = 01,02,!03,!04
.RE
.PP
\fBchid\fP = \fB<CAID>:<ChID>[,<CAID>:<ChID>]...\fP
.RS 3n
user assingment to SC specific ChIDs, default:none
.RE
.PP
\fBmonlevel\fP = \fB0\fP|\fB1\fP|\fB2\fP|\fB3\fP|\fB4\fP
.RS 3n
monitor level:

 \fB0\fP = no access to monitor (default)
 \fB1\fP = only server and own procs
 \fB2\fP = all procs, but viewing only
 \fB3\fP = all procs, reload of \fBoscam.user\fR possible
 \fB4\fP = complete access
.RE
.PP
\fBcccmaxhops\fP = \fBhops\fP
.RS 3
maximum hops limit for CCcam clients, default:10

 \fB-1\fP = CCcam disabled for this user
  \fB0\fP = local SCs only
  \fB1\fP = local SCs + 1 hop
  \fB2\fP = local SCs + 2 hops
 and so on
.RE
.PP
\fBcccreshare\fP = \fBlevel\fP
.RS 3n
reshare level for CCcam clients

 \fB-1\fP = use reshare level of \fBoscam.conf\fR (default)
  \fB0\fP = resharing for direct peer only
  \fBx\fP = resharing for direct peer and share level x
.RE
.PP
\fBcccignorereshare\fP = \fB-1\fP|\fB0\fP|\fB1\fP
.RS 3n
CCcam ignore reshare setting:

 \fB-1\fP = use ignore reshare level of \fBoscam.conf\fR (default)
  \fB0\fP = use ignore reshare setting of server
  \fB1\fP = use ignore reshare setting of reader or user
.RE
.PP
\fBcccstealth\fP = \fB-1\fP|\fB1\fP
.RS 3n
CCcam stealth:

 \fB-1\fP = use CCcam stealth of \fBoscam.conf\fR (default)
  \fB0\fP = use extended OSCam-CCcam protocol
  \fB1\fP = behaviour like the original CCcam: no activate partner
      detection and extended OSCam-CCcam protocol, prevent
      other OSCam to detect the server as OSCam server
.RE
.SH EXAMPLES
 [account]
 user       = username
 pwd        = password
 group      = 1
 au         = myserialmousereader
 services   = myservice
 betatunnel = 0100.0001:0101,0100.0002:0101
 caid       = 0100
 ident      = 0100:000000
 uniq       = 1
.SH "SEE ALSO"
\fBlist_smargo\fR(1), \fBoscam\fR(1), \fBoscam.ac\fR(5), \fBoscam.cacheex\fR(5), \fBoscam.cert\fR(5), \fBoscam.conf\fR(5), \fBoscam.dvbapi\fR(5), \fBoscam.fakecws\fR(5), \fBoscam.guess\fR(5), \fBoscam.ird\fR(5), \fBoscam.provid\fR(5), \fBoscam.ratelimit\fR(5), \fBoscam.server\fR(5), \fBoscam.services\fR(5), \fBoscam.tiers\fR(5), \fBoscam.srvid\fR(5), \fBoscam.srvid2\fR(5), \fBoscam.whitelist\fR(5)