.TH oscam.server 5 .SH NAME \fBoscam.server\fR - reader configuration file for OSCam .SH SYNOPSIS The server configuration file for OSCam contains reader parameters. sections in \fBoscam.server\fR are \fIrecurring\fR (more than one reader possible). At least one [reader] section is \fIrequired\fR. .SH DESCRIPTIONS .SS "The [reader] section" .PP \fBlabel\fP = \fBname\fP .RS 3n name for reader, \fIrequired\fR .RE .PP \fBenable\fP = \fB0\fP|\fB1\fP .RS 3n 0 = deactivate reader, default:1 .RE .PP \fBdescription\fP = \fBtext\fP .RS 3n description of reader, default:none .RE .PP \fBprotocol\fP = \fBreader protocol\fP .RS 3n reader protocol, \fIrequired\fR: \fBcamd35\fP|\fBcs357x\fP \fBcccam\fP \fBcs378x\fP \fBconstcw\fP \fBgbox\fP \fBghttp\fP \fBinternal\fP \fBmouse\fP \fBmp35\fP \fBnewcamd\fP|\fBnewcamd525\fP \fBnewcamd524\fP \fBpcsc\fP \fBradegast\fP \fBscam\fP \fBsc8in1\fP \fBserial\fP \fBsmargo\fP \fBsmartreader\fP .RE .PP \fBdevice\fP = \fB[;]serial:serialnum|bus:device\fP| \fB\fP| \fB,[,]\fP| \fB,\fP| \fB,\fP| \fBpcsc\fP| \fB<0|1>\fP>| \fBconstantcw\fP .RS 3n define local or remote reader \fBreadertype\fP: set reader type \fBSR\fP: Smartreader+ (default) \fBInfinity\fP: Infinity USB \fBTripleP1\fP: Smargo Triple Reader port 1 \fBTripleP2\fP: Smargo Triple Reader port 2 \fBTripleP3\fP: Smargo Triple Reader port 3 \fBbus:device\fP: bus name and device name of the Smartreader+ or Infinity USB (get the names with lsusb 'Bus' and 'Device') \fBserialnum\fP: serial number of reader of the Smartreader+ or Infinity USB \fBdevice\fP: device name \fBdevice:slot\fP: device name and slot number sc8in1 [1-8] \fI(only one SC8in1 reader supported)\fR \fBip\fP|\fBhostname\fP: IP address or host name \fBport\fP: TCP/IP port \fBlport\fP: remapping to local TCP/IP port \fBgboxpport\fP: UDP port for remote gbox peer \fBPCSC\fP: number of PCSC reader, starting with 0 \fB0|1\fP: for Coolstream HD-1 STB only: select reader 0 or reader 1 \fBconstantcw\fP: constant CW file name constant CW file format: .TP 3n \(bu standard format \fPCAID\fB:\fPProvider ID\fB:\fPService ID\fB:\fPPMT ID\fB:\fPECM PID\fI::\fRkey (16 Bytes seperated by spaces) example: 1234:123456:1234:2345:3456\fI::\fR00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F .TP 3n \(bu extended OScam format \fPCAID\fB:\fPProvider ID\fB:\fPService ID\fB:\fPPMT ID\fB:\fPECM PID\fI:Video PID:\fRkey (16 Bytes seperated by spaces) example: 1234:123456:1234:2345:3456\fI:7890:\fR00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F .RE .PP \fBdetect\fP = [\fB!\fP]\fBCD\fP|[\fB!\fP]\fBDSR\fP|[\fB!\fP]\fBCTS\fP|[\fB!\fP]\fBRING\fP|[\fB!\fP]\fBNONE\fP|[\fB!\fP]\fBgpio[1-7]\fP .RS 3n status detect of card, NONE = no detection, ! = inverse, default:CD .RE .PP \fBcardmhz\fP = \fBmhz\fP .RS 3n set standard SC frequency in units of 10 kHz, for Irdeto SC set to 600 mhz, for Dreambox DM800 / DM8000 set to 2700 mhz, for Dreambox DM7025 set to 8300 mhz, for older PowerPC Dreambox STBs set to 3150 mhz, refer to OVERCLOCKING, default:357 .RE .PP \fBmhz\fP = \fBfrequency\fP .RS 3n set reader frequency in units of 10 kHz, if \fBmhz\fP > \fBcardmhz\fP you are in overclocking mode. For Smargo readers and Dreambox internal readers frequency will be set by ATR if \fBautospeed\fP is set to 1, default:357 .RE .PP \fBautospeed\fP = \fB0\fP|\fB1\fP .RS 3n 1 = sets mhz according to ATR. Currently only used for smartreader, Smargo and Dreambox internal protocol, other readers will be adapted to use this parameter as well. If You wan't to overclock you're card set it to 0, default:1 .RE .PP \fBdeprecated\fP = \fB0\fP|\fB1\fP .RS 3n First the SC will be initialized in normal mode. If it fails, the SC will be automatically reverted to deprecated mode, so that the SC speed will not be changed and the communication will remain on normal ATR speed of 9600 baud. 1 = use deprecated SC mode only, default:0 .RE .PP \fBmode\fP = \fBmode\fP .RS 3n set card init mode for AzBox internal reader, default:none .RE .PP \fBsmargopatch\fP = \fB0\fP|\fB1\fP .RS 3n 1 = enable workaround for Smartreader+ reader until native mode works, default:0 .RE .PP \fBsc8in1_dtrrts_patch\fP = \fB0\fP|\fB1\fP .RS 3n 1 = enable fix for SC8in1/MCR DTR/RTS kernel bug, default:0 .RE .PP \fBuse_gpio\fP = \fB0\fP|\fB1\fP .RS 3n 1 = use GPIO to init the reader. This needs to be set on WRT54G router, default:0 .RE .PP \fB ins2e06\fP = \fBpayload\fP .RS 3n add check control for pin payload (4 hex bytes) for NDS Videoguard 2 SCs, valid for physical readers only, default:none .RE .PP \fBins7e\fP = \fBpayload\fP .RS 3n add 26 hex-bytes payload for NDS Videoguard 2 SCs, valid for physical readers only, default:none .RE .PP \fBins7e11\fP = \fBTA1 byte\fP .RS 3n set TA1 byte for NDS Videoguard 2 SCs, valid for physical readers only, default:none .RE .PP \fBfix07\fP = \fB0\fP|\fB1\fP .RS 3n 1=enable 0x07 fix for NDS Videoguard 2 SCs, valid for physical readers only, default:1 .RE .PP \fBforce_irdeto\fP = \fB0\fP|\fB1\fP .RS 3n 1 = force Irdeto SC mode even if RSA key is set for Irdeto tunnled Nagravion SC, default:0 .RE .PP \fBnagra_read\fP = \fB0\fP|\fB1\fP|\fB2\fP .RS 3n read Nagravison records (on NCMED SCs only): \fB0\fP = disabled (default) \fB1\fP = read all records with expired rights \fB2\fP = read records with valid rights only .RE .PP \fBrsakey\fP = \fBRSA key\fP .RS 3n RSA key for Nagravision/Tiger SCs, CAM key data for Irdeto SCs, Conax SCs, default:none .RE .PP \fBdeskey\fP = \fBDES key\fP .RS 3n DES key for Viaccess SCs post-processing, default:none .RE .PP \fBboxkey\fP = \fBbox key\fP .RS 3n box key for Nagravision SCs / CAM key for Irdeto SCs .RE .PP \fBpincode\fP = \fBpincode\fP .RS 3n pincode for Conax, Cryptoworks and Viaccess SCs, default:none .RE .PP \fBfix9993\fP = \fB0\fP|\fB1\fP .RS 3n 1 = enable fix for 9993 error with CAID 0919 Videoguard SCs, default:0 .RE .PP \fBreadtiers\fP = \fB0\fP|\fB1\fP|\fB2\fP .RS 3n method to get tiers of NDS Videoguard SCs: \fB0\fP = disabled (default) \fB1\fP = ins70 method \fB2\fP = ins76 method .RE .PP \fBboxid\fP = \fBNDS box ID\fP .RS 3n NDS receiver box id .RE .PP \fBndsversion\fP = \fB0\fP|\fB1\fP|\fB12\fP|\fB2\fP .RS 3n set NDS Videoguard version \fB0\fP = autodetection (default) \fB1\fP = NDS Videoguard 1 \fB12\fP = NDS Videoguard 1+ \fB2\fP = NDS Videoguard 2 .RE .PP \fBaeskeys\fP = \fBCAID #0\fP@\fBprovid\fP:\fBAES key #0 CAID #0\fP[,\fBAES key #1 CAID #0\fP],...[;\fBCAID #1\fP@\fBprovid\fP:\fBAES key #0 CAID #1\fP[,\fBAES key #1 CAID #1\fP],...]... .RS 3n multiple 16 bytes AES keys for Viaccess SCs (the used postprocessing AES key is specified through the D2 nano of the ECM) special AES keys: \fB00\fP = do not return any CW, no AES key specified \fBFF\fP = return CW received from the S, no AES key specified example: aeskeys = 0500@012345:000102030405060708090a0b0c0d0e0f;0500@543210:000102030405060708090a0b0c0d0e0f,0,0f0e0d0c0b0a090807060504030201 .RE .PP \fBkey\fP = \fBDES key\fP .RS 3n key for newcamd remote reader encryption .RE .PP \fBuser\fP = \fBname\fP .RS 3n user for remote reader .RE .PP \fBpassword\fP = \fBpassword\fP .RS 3n password for remote reader .RE .PP \fBservices\fP = \fB[!]services[,[!]]...\fP .RS 3n reader [de]assignment to service group, default=none .RE .PP \fBcaid\fP = \fB[&][:][,[&][:target ]]...\fP .RS 3n define and mapping of CAIDs for reader, default:all CAIDs with mask FFFF example: caid = 0100 caid = 0200&ffee:0300 caid = 0400&ff00:0500,0600 caid = 0702,0722 caid = 0702&ffdf (shortcut for the example above) .RE .PP \fBident\fP = \fB:[,provid]...[;:[,provid]...]...\fP .RS 3n set CAID and SC specific ident for reader example: ident = 0100:123456,234567;0200:345678,456789 .RE .PP \fBclass\fP = \fB[!]class[,[!]class]...\fP .RS 3n set SC specific class in hex for reader example: class = 01,02,!1b,!2b .RE .PP \fBchid\fP = \fBCAID:ChID\fP .RS 3n set SC specific ChIDs for reader, default:none example: chid = 0100:12 .RE .PP \fBgroup\fP = \fB1..64[,1..64]...\fP .RS 3n reader assingment to groups, default:none, \fIrequired\fR .RE .PP \fBaudisabled\fP = \fB0\fP|\fB1\fP .RS 3n 1 = exclude reader from auto AU, default:0 .RE .PP \fBauprovid\fP = \fBprovider ID\fP .RS 3n set provider ID to use the right reader for auto AU example: auprovid = 123456 .RE .PP \fBdisableserverfilter\fP = \fB0\fP|\fB1\fP .RS 3n 1 = ignore \fBcaid\fP and \fBprovid\fP settings of reader due faulty clients, default:0 .RE .PP \fBinactivitytimeout\fP = \fBseconds\fP .RS 3n inactivity timeout for all TCP based remote readers, -1 = reconnect on network failure for newcamd, even in idle, default:0 .RE .PP \fBreconnecttimeout\fP = \fBseconds\fP .RS 3n reconnect if missing answers from a remote reader, default:30 .RE .PP \fBreconnectdelay\fP = \fBmilli-seconds\fP .RS 3n set maximum TCP connection block delay, default:60000 .RE .PP \fBconnectoninit\fP = \fB0\fP|\fB1\fP .RS 3n 1 = allow newcamd connections to be established on startup although there isn't a request yet, default:0 .RE .PP \fBkeepalive\fP = \fB0\fP|\fB1\fP .RS 3n 1 = allow cs378x TCP socket to be always connected, default:0. Always on if cacheex reader type. .RE .PP \fBfallback\fP = \fB0\fP|\fB1\fP .RS 3n 1 = define reader as fallback, standard and fallback reader must have the same group, default:0 .RE .PP \fBfallback_percaid\fP = \fB[:[,ident]]...[;[:[,ident]]...]....\fP .RS 3n use reader as fallback for defined CAIDs only, two-digit wildcard CAIDs are possible, \fBfallback_percaid\fP overrules \fBfallback\fP, default:none example: fallback_percaid = 1234:234567;89;10:345678 .RE .PP \fBemmcache\fP = \fBusecache,rewrite,logging\fP .RS 3n set EMM cache of local reader: \fBusecache\fP = \fB0\fP|\fB1\fP||\fB2\fP \fB0\fP = EMM caching disabeld (default) \fB1\fP = enable EMM caching and save EMMs to file after stopping OSCam \fB2\fP = enable EMM caching, don't save EMMs to file after stopping OSCam \fBrewrite\fP = determines how often one and the same EMM is written, default:0 \fBlogging\fP = EMM logging mask: \fB0\fP = EMM logging disabled (default) \fB1\fP = logging EMM errors \fB2\fP = logging written EMMs \fB4\fP = logging skipped EMMs \fB8\fP = logging blocked EMMs \fB16\fP = logging disabled AU example: emmcache = 1,3,2 .RE .PP \fBcacheex\fP = \fB0\fP|\fB1\fP|\fB2\fP|\fB3\fP .RS 3n set cache exchange mode \fB0\fP: disable cache exchange mode (default) \fB1\fP: enable cache exchange pull mode \fB2\fP: enable cache exchange push mode for camd 3.5x / 3.57x and CCcam protocol \fB3\fP: enable reverse cache exchange push mode for camd 3.5x / 3.57x and CCcam protocol \fIIdentical cache exchange modes must be set on local OSCam server and remote OSCam user asccount.\fR \fIPlease consider memory consumption.\fR .RE .PP \fBcacheex_maxhop\fP = \fBhops\fP .RS 3n define maximum hops for cache exchange, default=10 .RE .PP \fBcsp_ecm_filter\fP = \fB[caid][&mask][@provid][$servid],n\fP .RS 3n cache exchange incoming ECM filter setting (mode 2 only) for Cardservproxy, default:none .RE .PP \fBcacheex_drop_csp\fP = \fB0\fP|\fB1\fP .RS 3n 1 = drop incoming Cardservproxy cache (mode 2 only), detection is zero ecmd5, default:0 .RE .PP \fBcacheex_allow_request\fP = \fB0\fP|\fB1\fP .RS 3n 1 = allow incoming ECM request (mode 2), default:1 .RE .PP \fBcacheex_allow_filter\fP = \fB0\fP|\fB1\fP .RS 3n 1 = allow cache exchange filter (for cache exchange mode 2 only), default:1 .RE .PP \fBcacheex_block_fakecws\fP = \fB0\fP|\fB1\fP .RS 3n 1 = enable fake DCWs blocking (for cache exchange mode 2 only), get fake DCWs form \fBoscam.fakecws\fP, default:0 .RE .PP \fBecmwhitelist\fP = [\fBCAID\fP[@\fBprovid\fP]:]\fBlength\fP[,\fBlength\fP]...[;[\fBCAID\fP[@\fBprovid\fP]:]\fBlength\fP[,\fBlength\fP]...]... .RS 3n set valid ECM length per CAID and provid in hex, default:none,provid=000000 example: ecmwhitelist = 10,20,0a,0b ecmwhitelist = 0100:10,20;0200@123456:0a,4b \fIIn normal operation mode this parameter is not required.\fR .RE .PP \fBecmheaderwhitelist\fP = [\fBCAID\fP[@\fBprovid\fP]:]\fBheader\fP[,\fBheader\fP]...[;[\fBCAID\fP[@\fBprovid\fP]:]\fBheader\fP[,\fBheader\fP]...]... .RS 3n set vaild ECM header per CAID and provid in hex, default:none,provid=000000 .RE .PP \fBratelimitecm\fP = \fBcount\fP .RS 3n number of different SIDs in ECMs allowed for an interval, default:0 .RE .PP \fBecmnotfoundlimit\fP = \fBcount\fP .RS 3n number of ECMs with "not found" answer until the reader will be restarted, 0 = no limit, default:0 .RE .PP \fBresetcycle\fP = \fBcount\fP .RS 3n number of ECMs until SC reset is performed, 0 = disabled, valid for physical readers only, default:0 .RE .PP \fBratelimitseconds\fP = \fBseconds\fP .RS 3n interval for rate limit, default:0 .RE .PP \fBecmunique\fP = \fB0\fP|\fB1\fP .RS 3n 1 = enable check for matching ECM hash in ratelimit slot , default:0 .RE .PP \fBsrvidholdseconds \fP = \fBseconds\fP .RS 3n time to keep service ID in ratelimit slot, during this time checkeding for ecmunique is disbaled, default:0 .RE .PP \fBcooldown\fP = \fBdelay\fP,\fBduration\fP .RS 3n define cooldown: \fBdelay\fP: delay in seconds for which the reader is allowed to do more ECM requests than defined by ecmratelimit, default: none \fBduration\fP: duration in seconds the reader needs to cooldown, default:none \fIratelimitecm and ratelimitseconds are required\fR .RE .PP \fBblocknano\fP = \fBnano[,nano]...\fP|\fPall\fP .RS 3n list of EMM-nanos to block (in hex w/o 0x) or all EMM-nanos, valid for physical readers only, default:none example: blocknano = 45,93,7a,ff blocknano = all .RE .PP \fBblockemm-u\fP = \fB0\fP|\fB1\fP .RS 3n 1 = block unique EMMs, default:0 .RE .PP \fBblockemm-s\fP = \fB0\fP|\fB1\fP .RS 3n 1 = block shared EMMs, default:0 .RE .PP \fBblockemm-g\fP = \fB0\fP|\fB1\fP .RS 3n 1 = block global EMMs, default:0 .RE .PP \fBblockemm-unknown\fP = \fB0\fP|\fB1\fP .RS 3n 1 = block unknown types of EMMs, default:0 .RE .PP \fBblockemm-bylen\fP = \fB[length range,length range]...\fP .RS 3n block all types of EMMs by length, default:none example: blockemm-bylen = 1-10,11- .RE .PP \fBread_old_classes\fP = \fB0\fP|\fB1\fP \fI(Viaccess SCs only)\fR .RS 3n 0 = read only active entitlements 1 = read all entitlements (default) .RE .PP \fBsaveemm-u\fP = \fB0\fP|\fB1\fP .RS 3n 1 = save unique EMMs to log file, default:0 .RE .PP \fBsaveemm-s\fP = \fB0\fP|\fB1\fP .RS 3n 1 = save shared EMMs to log file, default:0 .RE .PP \fBsaveemm-g\fP = \fB0\fP|\fB1\fP .RS 3n 1= save global EMMs to log file, default:0 .RE .PP \fBsaveemm-unknown\fP = \fB0\fP|\fB1\fP .RS 3n 1 = save unknown types of EMMs to log file, default:0 .RE .PP \fBsavenano\fP = \fBnano[,nano]....\fP|\fPall\fP \fI(obsolete)\fR .RS 3n list of EMM-nanos to save (in hex w/o 0x) or all EMM-nanos, only valid for physical readers, default:none example: savenano = 45,93,7a,ff savenano = all .RE .PP \fBreadnano\fP = \fB[path]filename\fP .RS 3n write file (usually a copy of a file saved by savenano) to your smartcard, if no path is specified, the specified file is searched for in the configuration directory, only valid for physical readers, default:none example: readnano = write.emm readnano = /var/oscam/write.emm .RE .PP \fBdropbadcws\fP = \fB0\fP|\fB1\fP .RS 3n 1 = reject bad CWs, send "not found" instead of bad CWs, default:0 .RE .PP \fBdisablecrccws\fP = \fB0\fP|\fB1\fP .RS 3n 1 = disable CRC for CW, default: 0 \fIIn normal operation mode this parameter is not required. Parameter is incompatible with DVB standard.\fR .RE .PP \fBident\fP = \fB[:[,]...][;[:[,]...]]...\fP .RS 3n use this reader as local in loadbalancer's reader selection, default:none .RE .PP \fBlb_whitelist_services\fP = \fB,...\fP .RS 3n reader assignement to service group for channels which may never be blocked by the loadbalancer to the reader , default=none .RE .PP \fBlb_weight\fP = \fBweight\fP .RS 3n the higher the value the higher the probability for reader selection in load balacing mode, default:100 It's an divider for the average responstime. .RE .PP \fBlb_force_fallback\fP = \fB0\fP|\fB1\fP .RS 3n 1 = set the reader always as fallaback for load balacing without considering the reader's statistics, default:0 .RE .PP \fBcccversion\fP = \fB
..\fP .RS 3n set CCcam version, default:none example: cccversion = 1.2.34 .RE .PP \fBcccmaxhops\fP = \fBhops\fP .RS 3n set CCcam maximum SC distance hops, default:10 \fB-1\fP = disabled \fB0\fP = remote local SCs only \fB1\fP = remote local SCs and + 1 hop \fB2\fP = remote local SCs and + 2 hops and so on After reading this SC hop will be incremented by one. .RE .PP \fBccchop\fP = \fBhop\fP .RS 3n set hop for non CCCam readers, default:0 .RE .PP \fBcccreshare\fP = \fBhop\fP .RS 3n set reader's CCcam reshare hop, default:0 \fB-1\fP = reshare value off cccam in global config \fb0\fP = resharing for direct peer only \fBx\fP = resharing for direct peer and share level x .RE .PP \fBcccwantemu\fP = \fB0\fP|\fB1\fP .RS 3n 1 = request to provide emu from CCCam server, too, default:0 .RE .PP \fBccckeepalive\fP = \fB0\fP|\fB1\fP .RS 3n 1 = send keepalive messages to keep connection to remote CCCam server up, default:0 .RE .PP \fBcccreconnect\fP = \fBtimeout\fP .RS 3n reconnect again after ECM request timeout in milli-seconds, default:4000 .RE .PP \fBcccmindown\fP = \fBnumber\fP .RS 3n filters all readers with hops smaller than number, default:0 .RE .PP \fBgbox_reshare\fP = \fBlevel\fP .RS 3n gbox reshare level of local cards, default:0 .RE .PP \fBgbox_max_distance\fP = \fBdistance\fP .RS 3n maximum distance to receive gbox peer cards, default:2 .RE .PP \fBgbox_max_ecm_send\fP = \fBnumber\fP .RS 3n maximum of gbox peers ECMs will be send to, default:3 .RE .PP \fBuse_ssl\fP = \fB0\fP|\fB1\fP .RS 3n 1 = use SSL for ghttp protocol, default:0 .RE .SH OVERCLOCKING .TP 3n \(bu Dreambox and other internal readers For Dreambox and other internal readers the highest possible clockrate will be auto detected. The \fBmhz\fR parameter lets you override the values chosen by OSCam, if it differs from 357 and 358, but usually you will not set any value for mhz. For certain Dreamboxes (especially PPC clones) the default mhz parameter leads to slow ECM times and/or "not found" ECMs. By setting \fBmhz\fR to values like 200, 300, 400, ... 1600 you can find a value that works for your receiver and your card. The higher the \fBmhz\fR value, the slower the ECM time (strange enough). If you choose the value too low, your card is not recognized (no ATR or "card not supported"). If you choose the value too high, you get slow ECM times. Our experience is that either no \fBmhz\fR line, or a line \fBmhz\fR = 1000 works best. .TP 3n \(bu Phoenix / Smartmouse reader Overclocking does not work with Windows and Mac OS X. Set \fBmhz\fR equivalent to the frequency of the reader. OSCam can not set the frequency of the reader. .TP 3n \(bu Smargo Smartreader+ Use protocol = smargo for the FDDI kernel drivers (no libusb needed) or (not recommended) use protocol = smartreader for OSCam's driver implementation based on libusb. Set the reader frequency with the native Smargo Smartreader+ tool (srp_tools). If not setting \fBmhz\fR and \fBcardmhz\fR, OSCam tries to set the baudrate automatically, according to the maximum speed indicated by ATR. Overclocking is possible. .PP OSCam tries to set the baudrate automatically. A standard serial port has limited baudrate settings, so SC overclocking might not work. When using a serial reader the best way for overclocking is connecting it to a FTDI based USB to serial port adapter. If overclocking does not work, verify the effective baudrate in the logfile. If it deviates too much from the requested baudrate, the SC will not be recognized (no ATR) and the value for \fBmhz\fR should be adjusted again. The higher the baudrate, the more accurate the effective baudrate can be. .SH CACHE EXCHANGE .TP 3n \(bu pull mode (on request: cache exchange from remote to local OSCam) ECM requests will be forwarded to the remote cache exchange partner. If the CW could not be found in the cache of the remote exchange partner, a not found will be answered. If the CW could not be found in the cache of the remote exchange partner but a pending ECM request is open, the request will be re-initiated after the wait time defined in \fBcacheexwaittime\fR. .TP 3n \(bu push mode (continuous: cache exchange from remote to local OSCam) CWs from the remote cache exchange partner will be forwarded to the local cache. Forwarding only works while the camd camd 3.5x / 3.57x or CCcam protocol connection between the local and remote OSCam has been established. .TP 3n \(bu reverse push mode (continuous: cache exchange from local to remote OSCam) CWs from the local cache will be forwarded to the remote cache exchange partner. Forwarding only works while the camd camd 3.5x / 3.57x or CCcam protocol connection between the remote and local OSCam has been established. .SH EXAMPLES .TP 3n \(bu serial mouse compatible reader [reader] label = myserialmousereader detect = cd protocol = mouse device = /dev/ttyS1 group = 1 caid = 0100 services = myservice,!thisservice .TP 3n \(bu USB mouse compatible reader [reader] label = myusbmousereader detect = cd protocol = mouse device = /dev/ttyUSB0 aeskey = 0102030405060708090a0b0c0d0e0f10 group = 2 caid = 0200 .TP 3n \(bu camd 3.78x reader [reader] label = mycamd378xreader protocol = cs378x device = 192.168.0.1,1234 user = user1 password = password1 group = 3 .TP 3n \(bu newcamd reader [reader] label = mynewcamdreader protocol = newcamd key = 0102030405060708091011121314 device = 192.168.0.2,2345 user = user2 password = password2 group = 4 .TP 3n \(bu CCcam reader [reader] label = mycccamreader protocol = cccam device = 192.168.0.3,3456 user = user3 password = password3 group = 5 caid = 0300,0400,0500 cccversion = 1.2.3 .TP 3n \(bu PCSC reader [reader] label = mypcscreader protocol = pcsc device = 0 aeskey = 0102030405060708090a0b0c0d0e0f10 group = 6 caid = 0600 .TP 3n \(bu Smargo Smartreader+ [reader] label = mysmartreader protocol = smartreader device = 001:002 aeskey = 0102030405060708090a0b0c0d0e0f10 group = 7 caid = 0700 .TP 3n \(bu internal reader [reader] label = myinternalreader protocol = internal device = /dev/sci0 group = 8 caid = 0800 .TP 3n. \(bu sc8in1 reader [reader] label = mysc8in1reader protocol = sc8in1 device = /dev/ttyUSB0:1 group = 9 caid = 0900 .TP 3n \(bu constant CW [reader] label = myconstantcw protocol = constcw device = /var/keys/constant.cw group = 10 .TP 3n \(bu gbox reader [reader] label = mygboxreader protocol = gbox device = 192.168.0.4,45678,56789 user = user4 password = password4 group = 11 caid = 1100 .SH "SEE ALSO" \fBlist_smargo\fR(1), \fBoscam\fR(1), \fBoscam.ac\fR(5), \fBoscam.cacheex\fR(5), \fBoscam.cert\fR(5), \fBoscam.conf\fR(5), \fBoscam.dvbapi\fR(5), \fBoscam.fakecws\fR(5), \fBoscam.guess\fR(5), \fBoscam.ird\fR(5), \fBoscam.provid\fR(5), \fBoscam.ratelimit\fR(5), \fBoscam.services\fR(5), \fBoscam.srvid\fR(5), \fBoscam.srvid2\fR(5), \fBoscam.tiers\fR(5), \fBoscam.user\fR(5), \fBoscam.whitelist\fR(5)